Garantía Postventa

After-Sales Service and Limited Warranty Agreement

Article 1 Scope and Definitions

1.1 This Agreement applies to all customers who purchase products from Party A, including but not limited to retail customers, agents, OEM/ODM customers, and white-label customers.

1.2 This Agreement applies only to products manufactured and sold directly by Party A. Any issues arising from unauthorized modification, disassembly, repair, or use of non-original Party A accessories are not covered under this Agreement.

1.3 In the event of any discrepancy or conflict between different language versions of this Agreement, the Chinese version shall prevail.

Article 2 Acceptance and Effectiveness

By accepting Party A’s quotation, confirming an order, paying for the goods, or performing any other act indicating an intention to cooperate, Party B is deemed to have fully read, understood, and agreed to be bound by all terms of this Agreement, including the rights, responsibilities, and limitations described herein.

Article 3 Limited Warranty

3.1 Warranty Commitment: Subject to the terms of this Agreement, Party A warrants that its products will be free from material defects in workmanship and materials under normal use from the commencement of the warranty period.

3.2 Warranty Period Commencement:

  • The warranty period for the product shall commence from the second day after Party B takes delivery of the goods.
  • If Party B cannot provide valid proof of delivery, the warranty period shall commence from the 30th day after the lot number date shown on the product.

3.3 Varying Warranty Periods: The warranty periods for different main components may vary. Please refer to Article 7 of this Agreement for details.

3.4 Special Provisions for Refrigerant

  • Due to varying inspection methods by customs in different countries and differing customer requirements, the pre-charged refrigerant in the equipment itself is not covered under the quality warranty of this Agreement.
  • During the warranty period, if Party A technically confirms that the pre-charged refrigerant has leaked or is insufficient due to a manufacturing defect, Party A will provide a one-time compensation of US$100 to Party B.
  • This compensation amount can be offset against the value of goods or parts in Party B’s subsequent new orders, or refunded directly upon Party B’s request. From the date the compensation is fulfilled, any issues related to the refrigerant for that specific unit will no longer be covered under the warranty services of this Agreement.

3.5 Non-Transferable Warranty

The warranty benefits under this Agreement are extended solely to the original purchaser (i.e., “Party B” in this Contract) of the product and are non-transferable to any subsequent user, owner, or any third party. Hi-Q Group’s warranty obligations are solely to the original purchaser.

Article 4 After-Sales Service Process

4.1 Service Request: If a product malfunctions during the warranty period, Party B shall or instruct their end-user to fill in the After-Sales Service Application Form (Appendix 2) according to the process outlined in Appendix 1. Party B shall consolidate these forms and submit them to Party A’s after-sales department for statistical purposes.

4.2 Information Provision: When applying for service, Party B must provide the following information for Party A’s technical diagnosis:

  • The device’s serial number, APP-ID, nameplate information, and product batch number.
  • A detailed description of the fault, parameters from the APP interface, and a video demonstrating the malfunction (which should include the device’s overall appearance, installation environment, water pipe connections, water level, and water flow in the bathtub, etc.).

4.3 Parts Support:

  • Party A will provide 3% of the total quantity of the contract order as regular parts free of charge for Party B’s after-sales service. For additional parts required, Party B may purchase them from Party A at 20% off the standard parts sales price.
  • If a core component*(1) (as defined in Article 7) fails and cannot be repaired locally, Party A will provide a replacement unit or part free of charge. The replacement part or unit will typically be shipped together with Party B’s new order. If Party B requests separate shipment or specifies a particular shipping method, Party B shall bear all associated freight costs.

Article 5 Customer Responsibilities and Cooperation

5.1 Knowledge and Capability: Party B should possess basic product knowledge, installation skills, and an after-sales team. Upon Party B’s request, Party A may provide free product and after-sales training.

5.2 End-User Service: Party B shall be responsible for all after-sales maintenance requests from its end-users under the guidance of Party A.

5.3 Shipping Costs:

  • For parts or equipment that Party A technically confirms require repair or replacement due to quality issues, Party A will provide the parts or replacement equipment free of charge, but Party B shall bear all associated shipping costs.
  • For non-core part failures or situations where functionality can be restored by replacing parts, Party A does not accept returns or refunds. If Party B insists on a return, Party B must ship the equipment back to Party A’s headquarters in China at its own expense.
  • For returns where responsibility is unclear, Party B must first ship the equipment back to Party A’s headquarters in China at its own expense. Only after inspection and confirmation by Party A’s technical personnel that the issue is due to Party A’s quality defect will a refund be issued. Otherwise, Party A has the right to refuse the refund or negotiate a partial refund based on the extent of damage.

Article 6 Limitation of Liability and Disclaimer

6.1 Maximum Liability:

In no event shall the aggregate liability of Party A and its affiliates for any and all causes exceed the purchase price paid by Party B for the relevant product. Party A shall not be liable for any indirect damages, including but not limited to loss of profits, loss of goodwill, business interruption, or any other consequential losses.

6.2 Refund Cap:

The amount of any refund or claim shall not exceed the value of the problematic product itself.

6.3 Force Majeure:

Party A shall not be held liable under this warranty for product damage caused by force majeure events such as fire, flood, earthquake, war, or government actions.

6.4 Human Damage:

Damage resulting from circumstances not attributable to Party A, including but not limited to transportation for which Party A is not responsible, improper installation, misuse, failure to follow operating instructions, unauthorized modifications, use of non-original parts, or power supply issues, is not covered by this warranty.

6.5 Damage Caused by Third-Party Products:

Damage to the equipment resulting from the connection, integration, or use of third-party products that are not provided or expressly authorized in writing by Party A is not covered under this warranty.

6.6 Normal Phenomena:

  • The equipment undergoes a real water cycle test before shipment. The presence of minor residual water stains or easily wipeable moisture on the interior or exterior surfaces of the equipment is normal and does not constitute a quality defect.
  • During equipment operation, condensation will naturally form on the surfaces of the water tank and pipes due to temperature differences. When a significant amount of condensation accumulates, it may drip onto the floor. This is an unavoidable physical phenomenon and does not constitute a product malfunction or defect. Party A does not accept return requests based on this phenomenon.
  • Rust may appear on some screws in contact with water on the equipment’s base plate. This is not covered under warranty, but Party B may request free replacement screws.

Article 7 Warranty Period for Main Components

List of Main Components and Warranty Period

ComponentWarranty  ComponentWarranty
Compressor12 Months  Temperature Probe12 Months
Radiator12 Months  Bomba de agua*(2)12 Months
Heat Exchanger12 Months  Water Hose12 Months
Motor Fan12 Months  Pipe adapter12 Months
Smart PCB12 Months  UV Lamp*(3)6 Months
LCD Control Panel12 Months  Filter ElementsNo warranty
  • * (1) Core Components: Compressor, Radiator, heat Exchanger. The warranty period is as specifically stipulated in the table above.
  • * (2) Water Pump: Includes the water pump and its power supply. During the warranty period, the corresponding damaged component will be replaced.
  • * (3) UV Lamp: Includes the UV lamp, glass shield, and UV power supply. During the warranty period, the corresponding damaged component will be replaced.

Article 8 Exclusion and Termination of Warranty Services

Under any of the following circumstances, Party B shall automatically forfeit and be deemed to have waived its right to warranty services under this Agreement, and Party A shall have the right to refuse to provide any form of warranty service (including but not limited to repair, replacement, or refund):

8.1 Any unauthorized tearing, obscuring, alteration, or removal of any label, serial number, anti-counterfeiting mark, or warranty certificate on the product.

8.2 Failure to provide an accurate, clear, and verifiable product serial number when applying for after-sales service.

8.3 Failure to follow the after-sales service process stipulated in Article 4 of this Agreement, particularly the inability to provide valid evidence (such as proof of purchase, product photos/videos) proving the equipment is manufactured by Party A. Mere oral descriptions, text messages, or chat records with third parties shall not be considered valid proof.

8.4 When Party A is responsible for transportation, Party B claims product damage during transit but fails to provide formal damage proof issued or acknowledged by the carrier within seven calendar days after signing for the product.

Article 9 Contact Us

For any feedback regarding product technology, installation, operation, or after-sales service, please contact us via the following email addresses and copy your designated market sales manager:

Service Type Dirección de correo electrónico
Service CenterAdmin@hi-qtech.com
Technology & BusinessAndre@hi-qtech.com
After-Sales ServiceSupport@hi-qtech.com

Article 10 Dispute Resolution

10.1 Negotiation and Mediation

Any dispute arising from or in connection with the performance of this Contract shall be first resolved through friendly negotiations between both parties. If negotiations fail, either party may propose to submit the dispute to a mediation institution agreed upon by both parties.

10.2 Arbitration

If the dispute is not settled through negotiation or mediation as described above, it shall be finally submitted to the China International Economic and Trade Arbitration Commission (CIETAC) for arbitration in accordance with CIETAC’s arbitration rules in effect at the time of applying for arbitration. The place of arbitration shall be Zhuhai, China. The language of arbitration shall be Chinese. The arbitral award is final and binding upon both parties.

10.3 Performance and Enforcement

If either party fails to comply with the arbitral award within the specified time limit, the other party shall have the right to apply to a competent court for enforcement of the award.

10.4 Cost Allocation

Unless otherwise awarded by the arbitral tribunal, the costs of arbitration (including but not limited to arbitration fees, legal fees, and appraisal fees) shall be borne by the losing party.

¿Por qué elegir Hi-Q OEM?

Por qué cada vez más propietarios invierten en terapia de inmersión en frío

?️ Personalización flexible

Adapte las especificaciones, el aspecto y los sistemas de control a las necesidades exclusivas de su mercado.

Fabricación certificada

Las certificaciones CE, ETL, PSE y SAA garantizan la conformidad y la seguridad en todo el mundo.

? Producción escalable

Capacidad mensual de hasta 6.000 unidades con un plazo de entrega de 30 días.

Proceso OEM: de la idea al producto

Nuestro proceso OEM en 6 pasos

Compartamos la carga

Datos breves

¿Listo para construir su oasis de recuperación?

Permítanos ayudarle a personalizar la configuración de inmersión en frío perfecta